Support & Wartung: Du bist verantwortlich für den technischen Support und die Wartung bestehender Typo3-Installationen, führst regelmäßige Updates und Sicherheitsüberprüfungen durch und kümmerst dich um die Qualitätssicherung durch Tests und Fehlerbehebung. Content-Management & Schulung: Du managst das Content-Management-System Typo3, unterstützt bei der Erstellung und Pflege von Inhalten und schulst Mitarbeiter*innen im Umgang mit Typo3.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
YOUR TASKS Coordinate and monitor the progress of subcontractors and report regularly to the BOP Manager and other stakeholders Ensure timely project completion by continuously tracking schedules and adjusting plans to prevent delays Enforce safety regulations and building codes through regular inspections and identification of hazards or violations Ensure all construction activities comply with approved plans, specifications, permits, and applicable standards Implement, supervise, and ensure compliance with the Quality Control Plan (QCP), including verification of completed work units and required testing Review construction procedures and resource requirements to meet design specifications and local/international standards Verify the foundation assembly process and act as a technical advisor during construction phases, applying defined quality procedures and stop points Identify and resolve issues during construction, verify subcontractor resources for correcting deviations, and review corrective procedures for compliance with QCP and regulations Maintain accurate documentation of project progress and quality control measures Communicate effectively with clients, contractors, and stakeholders to ensure project expectations are met YOUR PROFILE Degree in civil engineering or a related field; equivalent professional experience is also considered Experience in civil construction, ideally in wind energy projects and in supervisory roles Solid understanding of quality control procedures and local as well as international regulations Strong communication and leadership skills with the ability to guide and motivate teams Proven ability to resolve conflicts and conduct audits in construction environments Fluency in German and English (minimum B2–C1), both written and spoken Proficiency in project-related documentation and stakeholder interaction A valid driver’s license recognized in Germany is required for this position ADDITIONAL REQUIREMENTS The following valid certifications and safety trainings are required for this position: Working at Heights certification (issued within the last 12 months) First Aid training Fire Awareness training Confined Spaces training (due to work in the foundation pit) WILLINGNESS TO TRAVEL: You are ready to travel and work flexibly on-site according to project requirements.
YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS: Independently plan, structure, and execute technically complex aerodynamic design projects, including the development of new rotor blades and the detailed analysis of legacy designs Applying advanced fluid dynamics principles, leveraging high-fidelity simulation tools, and integrating multidisciplinary constraints to achieve optimal aerodynamic performance Development and continues improvement of prediction methods and industrialization of research approaches and methods Aerodynamic design, evaluation and optimization of wind turbine rotor blades Prepare and present technical results in engineering review meetings and communicate key findings, risks, and recommendations to senior management and other decision‑making stakeholders Automation of methods within the framework of in-house design tools Validation of results and method tuning using measurement data YOUR PROFILE: Master’s degree in Mechanical or Aeronautical Engineering, or a closely related field; a PhD is a strong advantage, particularly with specialization in aerodynamics Minimum of 5-8 years of professional experience in aerodynamic design or related engineering fields, ideally within the wind energy sector or similar industries involving complex fluid dynamics applications Strong organizational mindset with demonstrated ability to manage complex engineering projects from concept to execution Proficient in engineering programming, with hands-on experience in languages such as Python, C/C++, and MATLAB, applied to simulation, data analysis, and tool development Fluency in English is required; proficiency in German or Spanish is considered a plus Self-organized and self-driven personality with the ability to handle complex problems Ability to work in a multi-lingual, multi-locational and multicultural team YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
YOUR TASKS: Independently plan, structure, and execute technically complex aerodynamic design projects, including the development of new rotor blades and the detailed analysis of legacy designs Applying advanced fluid dynamics principles, leveraging high-fidelity simulation tools, and integrating multidisciplinary constraints to achieve optimal aerodynamic performance Development and continues improvement of prediction methods and industrialization of research approaches and methods Aerodynamic design, evaluation and optimization of wind turbine rotor blades Prepare and present technical results in engineering review meetings and communicate key findings, risks, and recommendations to senior management and other decision‑making stakeholders Automation of methods within the framework of in-house design tools Validation of results and method tuning using measurement data YOUR PROFILE: Master’s degree in Mechanical or Aeronautical Engineering, or a closely related field; a PhD is a strong advantage, particularly with specialization in aerodynamics Minimum of 5-8 years of professional experience in aerodynamic design or related engineering fields, ideally within the wind energy sector or similar industries involving complex fluid dynamics applications Strong organizational mindset with demonstrated ability to manage complex engineering projects from concept to execution Proficient in engineering programming, with hands-on experience in languages such as Python, C/C++, and MATLAB, applied to simulation, data analysis, and tool development Fluency in English is required; proficiency in German or Spanish is considered a plus Self-organized and self-driven personality with the ability to handle complex problems Ability to work in a multi-lingual, multi-locational and multicultural team YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Check the correct pre-assembly of the tower internals in the concrete segments Conduct audits of the preassembly and assembly phases of the concrete towers Perform the final inspections of the concrete tower prior to the handover to the PM organization Detect, open and manage the non-conformities opened during the construction phase Check the quality methods and documentation used by the subcontractors on site Report on the daily progress of the status of the construction activities in terms of quality Participate in meetings with other areas within the concrete tower structure to ensure execution of the project Coordinate with the global quality team in terms of tasks and activities on site YOUR PROFILE Certificate of Higher Education in Engineering or similar Experience in Construction, experience with wind turbine assembly and construction activities desirable.
Check the correct pre-assembly of the tower internals in the concrete segments Conduct audits of the preassembly and assembly phases of the concrete towers Perform the final inspections of the concrete tower prior to the handover to the PM organization Detect, open and manage the non-conformities opened during the construction phase Check the quality methods and documentation used by the subcontractors on site Report on the daily progress of the status of the construction activities in terms of quality Participate in meetings with other areas within the concrete tower structure to ensure execution of the project Coordinate with the global quality team in terms of tasks and activities on site YOUR PROFILE Certificate of Higher Education in Engineering or similar Experience in Construction, experience with wind turbine assembly and construction activities desirable.